Laser

The Laser Red Sail Numbers 9" come with an adhesive backing and are used for identification in sailing events and races. The 9" versions are popular for Laser 4.7,  Laser Pico and Funboat. We...

Stainless steel kicking strap plate for Standard, Radial and 4.7 lower mast attached with rivets. Not nlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless Rivets

Top mast collar black plastic fixed with rivets (sold separately). Suitable for Laser 1 and Laser Pico Masts. Specifications Material: Plastic Colour: Black

Laser Boom Plug - Inboard end to fit  boom to lower mast via gooseneck fitting. Attached with a rivet and made from plastic. Specifications Material: Plastic

Fits the Laser Standard and 4.7 lower mast, plastic mast foot plug with moulded in sand grooves, change it regularly to protect your mast hole.

Laser Performance Pico/Funboat Upper Mast Base Plug black plastic fits on the bottom of the top mast fixed with 2 x rivets (sold separately). Specifications Material: Plastic Colour: Black

Plug black plastic fits on the top of the top mast fixed with rivets x 2 (sold seperately).Can also be used as Laser Pico Top Mast Plug. Specifications Material: Plastic Colour: Black

The Laser Boom Fairlead in blue plastic to tie the clew hook to the boom. Also used for traveller or boom outhaul. Features Fitting requires rivets 3/16" x 3/4" (sold seperately) Also used for...

This large blue plastic Laser Boom Fairlead has a stainless steel insert to reduce chafing and allow larger lines with heavier loads. Features Suits the topaz deck fairlead Requires 2 x screw (6...

The Pico Toe Strap plate is used to spread the load when attaching toe strap or MK1/MK2 Laser friction pad. Specification Material: Plastic Colour: Blue

Laser Toe Strap Padded in grey with XD logo. Internal plastic stiffener stops the Laser Toe Strap from turning over, heat sealed screw holes for easy fit.

Holt Laser Grab Rail fit all Laser Performance and ILCA Dinghies  - Two required per boat - It is recommended to use a sealant, such as Sikaflex 291i to bed screws  Accessories Sikaflex...

The Laser XD deck fairlead with 23 mm holes. Specifications Width: 23 mm

Aluminium deck cleat is designed to hold 12mm to 16mm rope under high pressure. Specification Material: Aluminium Rope diameter: 1/2 - 5/8" (12 mm - 16 mm) Hole diameter: 3 3/4" (95 mm) Length:...

The Laser Harken Cammetrick cleat is similar to the Laser Cleat 91517 but this one comes made in plastic. Harken Micro Cam Cleats hold lines securely and release instantly for easy, precise trimming...

This Laser Cammetrick cleat is the same as the Harken 468 Cam Cleat. It is similar to the Laser Harken Cleat LS-91285 but this version comes in aluminium. Harken ball bearing cam cleats hold lines...

The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.

The Laser rudder head is a aluminium construction complete with a rudder ring and tilller retaining pin. Rudder fittings are stainless steal for long lasting, please make sure you rudder head has the...

Aluminium tiller extension complete with UJ and rubber non slip covering. Specifications Material: Aluminium Length: 1067 mm

High quality, reliable RWO OmniflexTiller Joint to suit most dinghy tiller extension, including ILCA Laser, Topper, and many others. This Omniflex joint is made from Elastomeric polymer which allows...

The Laser Tiller Extension made from carbon fibre it comes with a flexible tiller joint that attaches to your main tiller. Designed for the Laser XD range of racing hardware for the any class of...

New for 2019/2020! The Laser XD Carbon Tiller has extra special racing features designed for competition and racing Lasers. The Tiller suits the Standard, Radial or 4.7 rigs from the Laser range. The...

The ILCA Mega Bolt is the pivot bolt to fit the Rudder Head to the Rudders Plade - Supplied with 20mm Washers 

The Laser XD rudder head pivot bolt is an upgraded large diameter bolt and nylock nut with 20 mm washers. The rudder bolt will hold your rudder blade firmly in place.

Laser shock cord retainer with plastic clip keeps dagger board in place. Specifications Colour: Black Length: 7 mm

Laser Performance Daggerboard Infused.

The Laser Lower Vang Block is used for the Laser Pico and Laser Standard rig sailboats on the top section of the Vang which attaches to the eye plate on the boom.Comes with removable pin to...

Laser XD Vang Kicker Top Harken Block is plain bearing stainless steel body, kicker key is not supplied.

The Laser Curved Kicker Key fits onto the kicker/vang system and slots into the boom.

The Laser Harken Power Pack is a complete kit and will upgrade your old Laser cunningham and outhaul. The Harken Power Pack is retrofitable to older hulls and uses existing screw holes. The Power...

Harken Race complete kit to upgrade old systems for cunningham and outhaul retrofitable to older hulls, uses existing screw holes, supplied with all ropes blocks cleats and screws and fitting...

The ultimate clew tie down for the Laser. The Laser clew strap holds the clew of the sail tightly in place with velcro. This product is easy to fit and slips perfectly along the boom. Suitable for...

Pre-Spliced Laser Primary line for the Cunningham or Laser Downhaul system which connects to the kicker at one end, rigged through the sail and connected to a becket block at the other end...

Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material:...

Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material:...

This is a standard length Laser XD Secondary Line Downhaul made from Marlow Excel Control Line giving perfect control with low stretch and smooth tension and release movements. Features  Smooth...

Laser Outhaul Control Line Pre-cut 4 mm x 4.8 m made from high quality Marlow Excel Control. Features Precision control and release Smooth cover giving low friction through the sheaves Firm...

Original plastic construction plain bearing block fitted to boom with 91537 eye strap and attached with rivets. Specifications Material: Plastic Colour: Blue Number of block: Single

Large original traveller plain bearing block, plastic construction, uses englefield clips or sometimes called kissing clips to connect to the traveller block. Specifications Material: Plastic...

Small original traveller plain bearing block, plastic construction, uses englefield clips or sometimes called kissing clips to connect to the traveller block. Specifications Material: Plastic...