Laser

Laser Performance Vago Gennaker Sock.

The Laser Vago Standard Gennaker 10.85 m² rip stop nylon in yellow including sail bag. Specifications Material: Nylon Colour: Yellow

Laser Selden Mast Step attached to the cross beam on your boat with 2 x rivets (sold seperately). Connection bolt supplied for the Vago Mast.

These combined swivelling deck fairlead and camcleat assemblies are used for the jib sheet on both sides of the boat. Requires 3 x rivets for attachment (sold seperately). For the replacement cleat...

The replacement Halyard Bag to suit the Laser Vago sailboats.

Assembled ready to sail, rudder head, tiller, rudder blade and extension.

Laser Bahia and Vago mainsheet block assembly. Does not include standup pulley (See Code: LS-91333).

The Laser Vago Toe Strap set is supplied in grey and includes two long toe straps and one short toe strap. Specifications Colour: Grey

Trapeze Loop with block pulley for the Laser Bahia sailing dinghy.

A modern look. Performance you’d expect.The Laser Vago Sailboat offers a single-line launch and retrieval system for the gennaker as well as interchangeable sails that don’t require extra...

A modern look. Performance you’d expect.The Vago offers a single-line launch and retrieval system for the gennaker as well as interchangeable sails that don’t require extra rigging. Its...

Mesh gennaker sock in grey to cover and protect the gennaker on your Laser Bahia.

The RS Bahia Gennaker standard sail is 12.78 m² with red panels, made from rip stop nylon and including sail bag. Specifications Colour: Red Size: 12.78 m²

The Bahia Main Sail size is 10 m² and is supplied rolled with grey panels and reefing points made from Dacron, including long sail bag. Specifications Material: Dacron Colour: Grey...

Laser Bahia lower shroud wire and rope to suit the Laser Bahia Masts. Comes supplied with crimped eye to connect to deck (shackle not included).

The swivel to connect the Laser Bahia and Vago Jib Halyards to the decks.

Laser Bahia forestay wire to connect to mast. Specifications Material: Stainless steel

This furling is the official direct replacement for the Laser Vago and Laser Bahia furling drums.

The replacement eyelet for the deck of the Laser Bahia or the bow of the Dart 16 screw in Bow eye.

This Infused GRP centerboard is a multiboat centerboard that is compatible with both the Bahia and Vago. The replacement Centreboard for the Laser Bahia, Vago or L2. Constructed from GRP.

Replacement Inspection Port for the Laser Bahia and Laser Bug. Specifications Diameter: 4"

Metal gudgeon plates to suit the Laser Bahia and Vago sailing dinghies. Use the same part for the top and bottom gudgeons. Holds the rudder pintle on the transom.

Laser Vago and Bahia pivot bolt set to suit rudder.

The Laser Bahia Rudder comes assembled and ready to sail with rudder head, tiller, rudder blade and extension.

Toe strap set in grey includes two long and two short. Specifications Colour: Grey Number of strap: 4

The Bahia Oars comes as a set of two oars that separate into three sections. With a simple push of a lock the Bahia oars come apart to help with packing.     L = 115cm H = 23 cm W = 23cm

Laser Bahia Storage Lid to suit the storage box onboard your dinghy, which doubles up as a seat for rowing. Specifications Colour: Red

The storage box for the Bahia can also be used as a seat. Due to the size of the box you can fit all the things you need for a days sailing while not taking to much space up within the cockpit. It is...

The Bahia engine bracket will take a 2 hp or 3 hp engine. Please note that the Engine will no longer fit in the Storage Box due to size.

The Vago/Bahia Boom inboard end to attach to gooseneck on mast of any Laser Bahia or Vago sailing dinghy, requires 3/16" x 5/8" stainless steel rivets. Specifications Rivet material: Stainless steel...

An elegant design in aluminium with a silver or hard anodised finish. The rope drops down into the teeth. Specifications Material: Aluminium Colour: Silver Rope size: 3 mm - 6 mm Require...

Eyeplate to suit Laser 1 and Laser Bahia masts. Comes with 3 x rivets included for attachment.

Roto moulded mast head float in ice blue complete with all fittings and instructions to install float on mast head.

Replacement top mast pulley cap for the Laser Bahia and Laser Vago sailing craft.

Laser Bahia Shroud wire is supplied as a single wire for the Bahia Mast.

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and are constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis...

Gnav slider runs on top of boom connects to gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.

Plastic replacement Bhaia mast heel. This part is also known as the 'Laser Bahia Mast Foot' not to be confused with the Laser Bahia Mast Step.

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction riveted to cross beam used to pin mast foot to cross beam.