Deck Fittings & Foils

Complete rudder pintle and gidgeon assembly for Fusion Sailboat and also Laser Pico

Composite shaped buffer that fits into the stern end of daggerboard casing to protect the hull against any daggerboard impact force should you strike a rock or object

Transom drainage flaps for RS laser Pico. Optional Mounting Plate  RS Bahia & Pico Transom Flap, Attachment Plate RS-OPM-HF-501    

Plastic mounting plate to attach drainage flaps on RS Pico and Bahia Sail Boats - Formely Laser Pico and Bahia

Replacement straps for an aluminium or wood Sunfish tiller.

The modern Laser Bug or Pico Tiller Extension 710 mm with flexible attachment joint included. For a full Laser Tiller and rudder see code LS-8513.  Specifications Length: 710 mm

The Laser Pico has a simple downhaul system equipped with a self releasing cleat for when you run aground.

Laser Pico / Bug and Fusion Rudder Assembly with Blade, Head, Tiller & Tiller Extension Specifications Material: Aluminium

The replacement Laser Pico Bug Rudder Blade attaches to the transom through the rudderhead. Made in aluminium with composite end plugs top and bottom. Specifications Material: Aluminium

The Laser Gudgeon fits the Laser Pico's and Funboat sail craft constructed in stainless steel. The Laser Gudgeon bolts onto the transom to attach a rudder (sold seperately and comes complete with a spacer and rudder retention spring clip. Specifications ...

Replacement Rudder Retaining Clip for the Laser Pico range of sailboats. Fits on the gudgeon bracket on transom of dinghy to secure the rudder when in position. Specifications Material: Stainless steel

Talamex Drop Nosed Pins in AIS316 marine stainless steel in a variety of diameters and lengths

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

The Laser 4" Hatch come with a the lid and surrounding housing. Constructed in white plastic suitable as a Laser Pico Hatch replacement. Specifications Material: Plastic Colour: White Diameter: 4"

High quality HOLT padded centre toestrap to suit RS Pico and Laser Pico . Replaces Laser Performance part no 83112 Mounting screws sold separately M5 X 2 mm pan head. Locator Diagram Centre Toe Strap position as indicated by Part No 83112

Genuine RS Laser Pico Toe Straps with padding both sides. Fitted in three positions on an RS Laser Pico: Two either side of the main hiking strap and the third in the crew forward position. Sold singularly Mounting screws sold separately M5 X 2 mm pan...

Genuine Laser Pico Hiking Strap for centre position. Mounting screws sold seperately M5 X 2 mm pan head. Fits between the main block fitting and the stern bulkhead. Features Pico Centre Toe Strap with Laser Pico logo, Padded both sides Heat sealed...

The official Laser Daggerboard Plate replacement firts Laser Pico's only. Made from black plastic, positioned above the shim and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm) sold seperately. Specifications Material: Plastic...

The RS Pico Slot Strip for the underside of daggerboard plate and housing. It is a flexible lip that allows the centreboard to be passed through the deck but stops water from rushing back into the cockpit.