Deck Fittings & Foils

The Laser Pico Mainsheet Padeye 91303 is the official deck fitting made in stainless steel from Laser Boats. Dimensions Width: 35mm Length: 40mm Height: 25mm Fasteners: 4 x 5mm countersunk Material: S/S

Complete rudder pintle and gudgeon assembly for Fusion Sailboat and also Laser Pico  

Ocean Play Pico Daggerboard Rear Buff A composite-shaped buffer that fits into the stern end of the daggerboard casing to protect the hull against any daggerboard impact force, should you strike a rock or object

Transom drainage flaps for RS laser Pico. This transom flap is for the later Picos with the flap recessed into the transom. Made of a translucent flexible plastic, they are held in place by Transom Flap Plates, code 91573. Specification Size: 9cm x...

Plastic mounting plate to attach drainage flaps on RS Pico and Bahia Sail Boats - formerly Laser Pico and Bahia The transom flap fixing secures on top of the transom flap to hold it in place on your Laser Pico. Formerly part code: 91537 Laser Pico...

Replacement straps for an aluminium or wood Sunfish tiller.

The modern Laser Bug or Pico Tiller Extension 710 mm with flexible attachment joint included. For a full Laser Tiller and rudder, see code LS-8513.  Specification Length: 710 mm

The Laser Pico has a simple downhaul system equipped with a self-releasing cleat for when you run a ground.

Laser Pico / Bug and Fusion Rudder Assembly with Blade, Head, Tiller & Tiller Extension Specification Material: Aluminium

The replacement Laser Pico Bug Rudder Blade attaches to the transom through the rudderhead. Made in aluminium with composite end plugs, top and bottom. Aluminium rudder blade for the Laser Bug and Laser Pico, which comes complete with the plastic top and...

The Laser Gudgeon fits the Laser Pico and Funboat sail craft, constructed in stainless steel. The Laser Gudgeon bolts onto the transom to attach a rudder (sold separately and comes complete with a spacer and rudder retention spring clip...

Replacement Rudder Retaining Clip for the Laser Pico range of sailboats. Fits on the gudgeon bracket on the transom of the dinghy to secure the rudder when in position. Specification Material: Stainless steel

Talamex Drop Nosed Pins in AIS316 marine stainless steel in a variety of diameters and length.

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

The Laser 4" Hatch come with a the lid and surrounding housing. Constructed in white plastic suitable as a Laser Pico Hatch replacement. Specifications Material: Plastic Colour: White Diameter: 4"

High quality HOLT padded centre toestrap to suit RS Pico and Laser Pico. Replaces Laser Performance part no 83112 This is the longer of the Laser Pico padded hiking straps which is fitted to the middle of the boat for the helm. The holes at each end of...

Genuine RS Laser Pico Toe Straps with padding both sides. Fitted in three positions on an RS Laser Pico: Two either side of the main hiking strap and the third in the crew forward position. Sold singularly Mounting screws sold separately M5 X 2 mm pan...

The official Laser Daggerboard Plate replacement fits Laser Pico's only. Made from black plastic, positioned above the shim, and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm) sold separately. Specifications Material:...

The RS Pico Slot Strip for the underside of the daggerboard plate and housing. It is a flexible lip that allows the centreboard to be passed through the deck but stops water from rushing back into the cockpit. It keeps the daggerboard casing closed so...

Mast step plate, black plastic, with a large hole to take the mast foot, and 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

Transom bung complete unit includes a drain socket to screw to hull, complete with a retaining clip and O-ring.