ILCA Laser Boats & Parts

ILCA 4, formerly 4.7 Laser Dinghy, fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, Composite Top Mast and Hyde Sails.  Element 6 is one of the recently expanded group of ILCA Laser...

The ILCA 4 ( Formerly 4.7)  Sailing Dinghy  - Approved for ILCA event The ILCA 4  features the same hull as the ILCA7(Standard) and ILCA6(Radial) but has a smaller sail plan making it more manageable for lighter and younger sailors. The...

The ILCA 6 ( Formerly the Radail Class) Sailing Dinghy  - Approved for ILCA event - Manufactured by leading sail boat maker, Ovingtons The ILCA Radial features the same hull as the ILCA Standard and ILCA 4.7 but has the mid-level sail plan. Used...

ILCA 6 Laser Dinghy (Formerly Laser Radial ), fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, composite top mast  and Hyde Sails.  Element 6 is one of the recently expanded group of...

The ILCA 7 Full Rig Sailing Dinghy approved for ILCA event - Manufactured by leading sail boat maker, Ovington  The ILCA 7 Standard Rig Boat features the same hull as the ILCA Radail and ILCA 4.7 but has the full rig Mk11 Radial sail plan. This is...

ILCA 7, the full rig Laser Dinghy, fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, composite upper mast and Hyde Sails.  Element 6 is one of the recently expanded group of ILCA Laser...

Official ILCA Laser Composite Upper Mast.Approved for ILCA events, suiting all rigs ILCA4, ILCA6 & ILCA7. Also suitable for Laser 4.7, Radial & Full Rig. Specifications Material: Composite / Epoxy Length: 3.6 m

Lower mast, base plug to suit  ILCA 4 & 7 and Laser 4.7 and Full Rig Sail boats -Includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...

ILCA Laser Boom with Harken ball bearing blocks. Official ILCA approved for all ILCA events and suitlable for all Rigs- ILCA 4, ILCA 6, ILCA 7. Features Harken Boom End and  Centre MainsheetsBlocks fitted Official ILCA approved Suits All modesl...

ILCA 4  Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker and gooseneck fittings.  ILCA Class Approved

ILCA 6 lower mast section in  anodized aluminium ,including lower mast plug, kicker and gooseneck fittings. Approved for ILCA Class events - Compatible with Laser Radial Rig  

ILCA 7 Laser lower mast section inanodized aluminium tube including lower mast plug, kicker and gooseneck fittings. Specification Material: Aluminium ILCA Class legal

ILCA Laser XD Harken high performance vang base pulley unit - Fully ILCA Class legal and also compatible to all Laser Rigs, 4.7, Radial & Full Rig Features ILCA Class Legal Clevis pins included for attachment and...

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and requires 2 x Laser XD Harken 16 mm Air Block...

ILCA Harken XD Outhaul & Downhaul Deck Ceat with Harken Double Jammer. Suits all models ILCA & Laser - Official branded ILCA product. Fasteners 2x A4 Stainless 10 x 1 1/2" self tappers Use sealant in when installing.

This ILCA Laser Outhaul / Vang secondary line is made from 4mm Marlow Excel Control rope and provides excellent strength, flexiiblity and strength. Ready to go and cut to the required length of 4.95 mts, Usage Use as Secondary Vang Line for all rigs in...

High performance Harken boom end, mainsheet block with becket for all rigs ILCA or Laser Dinghies Features ILCA Class Legal High performance Suits all Rigs  Suius Laser XD   

ILCA Laser high performance Harken middle boom mainsheet block with bearings - This block is permanently fixed to the laser boom and riveted in place with a stainless steel eye strap Features ILCA Lass Class legal High performance Harken design...

Replacement boom vang plate for use with ILCA and Laser boats Fasteners Requires 4 x 4.8mm x 12.8m  Stainless Steel A4 Rivets

Lower mast, base plug used on the ILCA6, Laser Radial, Funboat and Pico lower mast, includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...

Harken ILCA Laser complete mainsheet block set includes stainless steel rivets - Official ILCA class approved , this block set uses ILCA exclusive Harken bearing blocks and will fit any Laser or ILCA class dinghy. Features Enhanced performance and...

ILCA deck mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7.

Harken 1/4" x 3/8" Stainless Clevis Pin & Ring set used to connect the Harken Vang Block to the Mast on ILCA and Laser Sailboats

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and includes 2 x Laser XD Harken 16 mm Air...

Harken high performance XD Vang Kit with lines and Harken blocks to suits all rigs ILCA and Laser Sailboats. Includes high grade Harken vang key  

Element 6,  high performance ILCA6 composite lower mast section including lower mast plug, kicker and gooseneck fittings. These new ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts, they will...

ILCA 7 approved Laser Main Sail  - Class compliant for all ILCA events. This sail also suits the Laser Performance L1 standard rig. Optional Extras Sail Numbers - Uses 4 x 12" Red  Sail Numbers - 8 x 12" Black Country Letters - 12" ...

New composite Ronstan ILCA Lower Vang unit giving exceptional control and easy adjustment, and now being preferred by some of the world's leading ILCA professionals.   Features Lowest friction ILCA® vang unit available. HHL sheave for the high...

Top mast Plug to suit ILCA Composite upper Mast, 

Bottom Plug to suit ILCA Composite upper mast

Full race spec ILCA upgrade kit with Harken Deck Cam Cleats and all ropes and pulleys included.  Give full performance cockpit control to the Cunningham and Downhaul trims  

ILCA Clew Strap, the strap holds the clew tightly in place using Velcro and through clever design it is easy fitted and yet still slips nicely along the boom.

ILCA Laser Centreboard Stop Set by Holt How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap  Fit the part assembled unit to the centreboard and then align and...

Ex-Charter Element ILCA 4 - Sailed 1 Event Only - Australia All ex-Charter boats include: stacking trolley, foil bag, top cover & sail bags . Full carbon rig - upper & lower mast  Latest Numbers 223+++ Excellent condition with: NEW ropes...

Ex-Charter Element ILCA 7 - Sailed 1 Event Only - Australia All ex-Charter boats include: stacking trolley, foil bag, top cover & sail bags . Full carbon rig - upper & lower mast  Latest Numbers 223+++ Excellent condition with: NEW ropes...

Ex-Charter Element ILCA 6 - Sailed 1 Event Only - Australia All ex-Charter boats include: stacking trolley, foil bag, top cover & sail bags . Full carbon rig - upper & lower mast  Latest Numbers 223+++ Excellent condition with: NEW ropes...

Element 6,  high performance ILCA6 composite lower mast section including lower mast plug, kicker and gooseneck fittings. These Ex-Charter ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts,...

Ovington's ILCA Laser 22mm x 125mm carbon tiller extension with Optiflex Tiller Joint fitted - Carbon construction with spiral textured grip and flush ruberrised end cap This is the preferred size for ILCA / Laser event...

ILCA /Laser Boom Block Stainless Eye Strap  40mm Hole Centres For attaching both blocks to ILCA / Laser booms Fasteners Use 2 x 4.8mm  x 12mm  Stainless Steel Rivets We recommend using Duralac between rivets and spars - This prevents...

ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This goodeneck also suits Laser Performance models in Standard, Radial and 4.7 rigs Specifications Material: Stainless steel Fasteners 6 x M4.8 x 12mm Stainless Steel Rivets -...