ILCA

ILCA Clew Strap, the strap holds the clew tightly in place using Velcro and through clever design it is easy fitted and yet still slips nicely along the boom.

Official ILCA Laser Composite Upper Mast -  Approved for ILCA events , suits all rigs ILCA4. ILCA6 & ILCA7 Also suitable for Laser 4.7, Radial & Full Rig   Speciications Material:...

ILCA Laser Centreboard Stop Set by Holt How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap  Fit the part...

The ILCA 4 ( Formerly 4.7)  Sailing Dinghy  - Approved for ILCA event The ILCA 4  features the same hull as the ILCA7  Standard and ILCA6  Radial but has a smaller sail plan...

The ILCA 6 ( Formerly the Radail Class) Sailing Dinghy  - Approved for ILCA event - Manufactured by leading sail boat maker, Ovingtons The ILCA Radial features the same hull as the ILCA...

The ILCA 7 Full Rig Sailing Dinghy approved for ILCA event - Manufactured by leading sail boat maker, Ovington  The ILCA 7 Standard Rig Boat features the same hull as the ILCA Radail and ILCA 4...

ILCA deck mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7.

Fully approved ILCA4 Laser Sail, formerly the 4.7 Rig - Made by Hyde this sail is approved for all ILCA governed events. ILCA 4 Sail Numbering Guide Download the ILCA 4 Sail Numbering Guide...

Harken SP004 3/16" x 3/4" Stainless Clevis Pin used for the top connection on Harken Laser Vang Block

Harken high performance XD Vang Kit with lines, Harken base block, Ronstan Hi-Load and Orbit blocks,  and includes high grade Harken vang key. Suits all rigs ILCA and Laser...

Harken high performance XD Vang Kit with lines and Harken blocks to suits all rigs ILCA and Laser Sailboats. Includes high grade Harken vang key  

Replacement ILCA Laser bottom plate fitting to suit Harken XD outhaul and downhaul deck cleat fitting. Includes line guides . Suits all ILCA and Laser sailboats fitted with the XD or High Performance...

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast...

Harken 1/4" x 3/8" Stainless Clevis Pin & Ring set used to connect the Harken Vang Block to the Mast on ILCA and Laser Sailboats

Lower mast, base plug to suit  ILCA 4 & 7 and Laser 4.7 and Full Rig Sail boats -Includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4...

Ovington's ILCA Laser 22mm x 125mm carbon tiller extension with Optiflex Tiller Joint fitted - Carbon construction with spiral textured grip and flush ruberrised end cap This is the preferred size...

ILCA Laser Painter Line in yellow flecked, floating polyproplene line - 8mm x 8m Braid - Satisfies the requirement to carry a tow line in ILCA Class Events

ILCA Laser Radial ILCA6 composite bottom mast section including lower mast plug, kicker and gooseneck fittings. These new ILCA masts are designed with the same bend and performance characteristics...

Heavy grade Eye Strap with 32mm Hole Centres  - Used for hiking strap, stern bulkhead attachment on Laser

ILCA approved batten set to suit ILCA 4 & ILCA 6 Sails - Set of 3 - Also suits Laser 4.7 and Laser Radial

ILCA 7 approved Laser Main Sail  - Class compliant for all ILCA events. This sail also suits the Laser Performance L1 standard rig. Specifications Mk2 (Standard Rig) cut sail  Optional...

ILCA 6 approved Laser sail by Pryde - Class compliant for all ILCA events. This sail will also suit the Laser Radial rig. ILCA 6 Sail Numbering Guide Download the ILCA 6 Sail Numbering Guide...

ILCA 6 approved Laser sail by Hyde - Class compliant for all ILCA events. This sail will also suit the Laser Radial rig. ILCA 6 Sail Numbering Guide Download the ILCA 6 Sail Numbering Guide...

ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This goodeneck also suits Laser Performance models in Standard, Radial and 4.7 rigs Specifications Material: Stainless...

Lower mast, base plug used on the ILCA6, Laser Radial, Funboat and Pico lower mast, includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm...

ILCA Laser Boom with Harken ball bearing blocks. Official ILCA approved for all ILCA events and suitlable for all Rigs- ILCA 4, ILCA 6, ILCA 7. Features Harken Boom End and  Centre...

Anodized aluminium tube with end plugs and sleeve fitted. A direct replacement for the top mast that comes on your Laser 4.7, Radial or Standard rig. Suits all types of Laser sailing boat. The Laser...

ILCA 4  Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker and gooseneck fittings.  ILCA Class Approved

ILCA 6 lower mast section in  anodized aluminium ,including lower mast plug, kicker and gooseneck fittings. Approved for ILCA Class events - Compatible with Laser Radial Rig  

ILCA 7 Laser lower mast section inanodized aluminium tube including lower mast plug, kicker and gooseneck fittings. Specification Material: Aluminium ILCA Class legal

The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similiar sealant to keep the hull watertight.

Official ILCA approved Nautos self-bailer ( Autobailer)  - Suits all models ILCA and Laser

Standard Bow eye fairlead for all Laser and ILCA rig sail boats

ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low  How to assemble Allign the first cap fitting to the centre shaft and push down...

The ILCA Laser Friction Pad MK2 is screwed to the back of your daggerboard casing and allows for perfect grip and slip ratio when raising the board.

Genuine ILCA Rudder Gudgeon asteners 4 x Sowester Pan Head Self Tappers per Gudgeon - Size  8 x 1 1/2"  Select size here

This ILCA / Laser tiller retaining pin secures the tiller to the rudder head. Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmlypressed into the head before...

Official ILCA Rudder Head comes with rudder megabolt.  Suits all models ILCA 4, 6 & 7 and Laser 4.7, Radial and Full Rig

Official ILCA fused rudder blade only - Suiys all models and Class leagal for all ILCA events. Note Also suits Laser (Torch logo) Sailboats.

ILCA Laser XD Harken high performance vang base pulley unit - Fully ILCA Class legal and also compatible to all Laser Rigs, 4.7, Radial & Full Rig Features ILCA Class Legal Clevis pins included...