ILCA

The Harken H1250.ILCA is the upper block in the Harken 1253.ILCA vang (kicker) system for ILCA dinghies. It combines a single 25 mm Fly sheave with a cast stainless steel vang key that slots into the...

The Harken H1251 is a compact twisted fiddle block designed to sit in the middle of the ILCA / Laser vang (kicker) system. It pairs a 29 mm Zircon sheave with an 18 mm Fly sheave. The twisted layout...

The Harken MK2 XD vang (kicker) kit gives ILCA sailors precise control of boom lift and mainsail twist. It combines a 25 mm aluminium Fly upper block, a 29/18 mm Zircon twisted fiddle block and a...

The ILCA Laser XD Vang Kit features Ronstan Hi Load and Orbit 350 blocks for controlling boom lift and mainsail twist on ILCA and Laser dinghies. The kit is supplied without control lines, so you can...

Original ILCA batten set for the new ILCA 4 MK2 bi-radial sail. The set includes three tapered sail battens with end caps, ready to fit the batten pockets of the MK2 sail Features Designed for the...

ILCA 7 approved Laser Main Sail - Class compliant for all ILCA events. This sail also suits the Laser Performance L1 standard rig. Optional Extras Sail Numbers - Uses 4 x 12" Red Sail Numbers - 8 x...

New composite Ronstan ILCA Lower Vang or Kicker Block giving exceptional control and easy adjustment, and now being preferred by some of the world's leading ILCA professionals. Features Lowest...

Top mast Plug to suit ILCA Composite upper Mast

This ILCA Composite Top Mast Bottom Plug is a precision-fitting component designed specifically for the composite upper mast section on ILCA / Laser-style rigs. It seals the base of the composite top...

Grabrails for ILCS and Laser Sailboats - Colour Grey - Suits all Rigs

The ILCA Cunningham / Outhaul Kit – Harken Upgrade is a full race-spec rigging kit designed to bring your one-design ILCA dinghy up to high-performance standard. Featuring premium hardware from...

ILCA Clew Strap, the strap holds the clew tightly in place using Velcro and through clever design it is easy fitted and yet still slips nicely along the boom.

ILCA/Laser Tiller composite construction including flexible joint and rudder down cleat - Class legal for ILCA events. Features Flat plate design Composite carbon fibre and epoxy Includes RWO tiller...

ILCA Laser Centreboard Stop Set by Holt How to assemble Align the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap  Fit the part assembled...

The ILCA 4 ( Formerly 4.7)  Sailing Dinghy  - Approved for ILCA event The ILCA 4  features the same hull as the ILCA7(Standard) and ILCA6(Radial) but has a smaller sail plan, making it more...

The ILCA 6 ( Formerly the Radial Class) Sailing Dinghy - Approved for ILCA event - Manufactured by leading sailboat maker, Ovingtons The ILCA Radial features the same hull as the ILCA Standard and...

The ILCA 7 Full Rig Sailing Dinghy is approved for the ILCA event - Manufactured by leading sailboat maker, Ovington  The ILCA 7 Standard Rig Boat features the same hull as the ILCA Radial and ILCA 4...

Official ILCA Laser Composite Upper Mast.Approved for ILCA events, suiting all rigs ILCA4, ILCA6 & ILCA7. Also suitable for Laser 4.7, Radial & Full Rig. Specifications Material: Composite /...

ILCA 4  Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker, and gooseneck fittings.  ILCA Class Approved

ILCA deck-mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7. The advantage of the Laser aluminium traveler fairlead is that it doesn't break like the plastic...

Element 6, high-performance ILCA6 composite lower mast section including lower mast plug, kicker, and gooseneck fittings. These new ILCA masts are designed with the same bend and performance...

ILCA 6 lower mast section in anodized aluminium, including lower mast plug, kicker, and gooseneck fittings. Approved for ILCA Class events - Compatible with Laser Radial Rig  

ILCA 7 Laser lower mast section in anodized aluminium tube, including lower mast plug, kicker, and gooseneck fittings. Specifications Material: Aluminium ILCA Class legal

Replacement boom vang plate for use with ILCA and Laser boats Fasteners Requires 4 x 4.8mm x 12.8m Stainless Steel A4 Rivets

Replacement lower base plate only for Harken Outhaul / Vang Deck Cleat

Harken SP004 3/16" x 3/4" Stainless Clevis Pin used for the top connection on Harken Laser Vang Block

Harken high-performance XD Vang Kit with lines, Harken base block, Ronstan Hi-Load and Orbit blocks,  and includes high-grade Harken vang key. Suits all rigs ILCA and Laser Sailboats

Harken high performance XD Vang Kit with lines and Harken blocks to suits all rigs ILCA and Laser Sailboats. Includes high grade Harken vang key. The ILCA / Laser Harken Vang Assembly is a very...

Replacement ILCA Laser bottom plate fitting to suit Harken XD outhaul and downhaul deck cleat fitting. Includes line guides. Suits all ILCA and Laser sailboats fitted with the XD or High Performance...

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat. The plate is mounted directly aft of the mast slot and...

Harken 1/4" x 3/8" Stainless Clevis Pin & Ring set used to connect the Harken Vang Block to the Mast on ILCA and Laser Sailboats

Lower mast, base plug to suit  ILCA 4 & 7 and Laser 4.7 and Full Rig Sail boats -Includes grooved feature to prevent sand entrapment and wear on your boat. Important Fixed in place with a 4.8mm...

Ovington's ILCA Laser 22 mm x 125 mm carbon tiller extension with Optiflex Tiller Joint fitted - Carbon construction with spiral textured grip and flush rubberised end cap

ILCA Laser Painter Line in yellow flecked, floating polypropylene line - 8mm x 8m Braid - Satisfies the requirement to carry a tow line in ILCA Class Events.

ILCA /Laser Boom Block Stainless Eye Strap  40mm Hole Centres For attaching both blocks to the ILCA / Laser booms Fasteners Use 2 x 4.8mm  x 12mm  Stainless Steel Rivets We recommend using Duralac...

Heavy grade Eye Strap with 32mm Hole Centres - Used for hiking strap, stern bulkhead attachment on ILCA Laser.

ILCA approved batten set to suit ILCA 4 & ILCA 6 Sails - Set of 3 - Also suits Laser 4.7 and Laser Radial. Complete batten set for ILCA 4 and ILCA 6 sails. Includes three battens with end caps...

ILCA 7 approved Laser Main Sail - Class compliant for all ILCA events. This sail also suits the Laser Performance L1 standard rig. Specification Mk2 (Standard Rig) cut sail Optional Extras Sail...

Elevate your sailing performance with the official ILCA 4 Miki Sail, the latest evolution in the world’s most popular youth one-design class. Formerly known as the Laser 4.7, the ILCA 4 is the...

ILCA 6 approved Laser sail by Pryde - Class compliant for all ILCA events. This sail will also suit the Laser Radial rig. ILCA 6 Sail Numbering Guide Download the ILCA 6 Sail Numbering Guide here