Laser Deck Fittings: Cleats, Bungs & Bailers
-
ILCA Laser Bow Eye Fairlead - ILC5910
ILCA
HKD58.18Standard Bow eye fairlead for all Laser and ILCA rig sail boatsILC5910HKD58.18 -
Laser Performance Deck Fairlead - 23mm
Laser
HKD66.56The Laser XD deck fairlead with 23 mm holes. Specifications Width: 23 mmLS-91321HKD66.56 -
Laser Performance CL220 Racing Clamcleat - 12mm-16mm
Laser
HKD193.56Aluminium deck cleat is designed to hold 12mm to 16mm rope under high pressure. Specification Material: Aluminium Rope diameter: 1/2 - 5/8" (12 mm - 16 mm) Hole diameter: 3 3/4" (95 mm) Length: 4 5/8" (118 mm) Width: 1 1/2" (37 mm) Height: 1 3/4"...LS-CL220/RHKD193.56 -
Laser Performance Harken Micro Cammetrick Cleat - Plastic
Laser
HKD192.47The Laser Harken Cammetrick cleat is similar to the Laser Cleat 91517 but this one comes made in plastic. Harken Micro Cam Cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams for racing...LS-91285HKD192.47 -
Laser Performance Harken Micro Cammetrick Cleat - Aluminium
Laser
HKD460.04This Laser Cammetrick cleat is the same as the Harken 468 Cam Cleat. It is similar to the Laser Harken Cleat LS-91285 but this version comes in aluminium. Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming...LS-91517HKD460.04 -
ILCA Laser Daggerboard Stop Sets
ILCA
HKD83.30ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of...ILC3916HKD83.30 -
ILCA Laser Friction Pad - MK2
ILCA
HKD141.90The ILCA Laser Friction Pad MK2 is screwed to the back of your daggerboard casing and allows for perfect grip and slip ratio when raising the board.LS-91538HKD141.90 -
Laser Performance Friction Pad - MK1
Laser
HKD175.39The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.LS-85239HKD175.39 -
ILCA Laser Harken XD Block Plate
ILCA
HKD192.14The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and requires 2 x Laser XD Harken 16 mm Air Block...ILC5918HKD192.14 -
ILCA Laser XD Deck Plate with Harken Cleats
ILCA
HKD962.77ILCA Harken XD Outhaul & Downhaul Deck Ceat with Harken Double Jammer. Suits all models ILCA & Laser - Official branded ILCA product. Fasteners 2x A4 Stainless 10 x 1 1/2" self tappers Use sealant in when installing.ILC5926HKD962.77 -
Laser Performance Bailer Bung
Laser
HKD175.39A replacement bung for your Laser Self Bailer. Very easy to fit and recommended to have a spare Bailer Bung with your sailing kit.LS-91351HKD175.39 -
RWO Traveller Fairlead - Stainless Insert
RWO
HKD29.30RWO deck mounted, traveller fairlead with stainless steel insert Suits ILCA 4,6 & 7 and Laser 4.7, Radial & Standard. Features 10mm Aperture Hole centres 23mm Height 18mm High load bearing,acetal resin with stainless insertRWOR3246THKD29.30