Laser Deck Fittings: Cleats, Bungs & Bailers

ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low  How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of...

RWO deck mounted, traveller fairlead with stainless steel insert Suits ILCA 4,6 & 7 and Laser 4.7, Radial & Standard. Features 10mm Aperture Hole centres 23mm Height 18mm High load bearing,acetal resin with stainless insert

ILCA deck mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7.

Specifications Aluminium Hard anodised Inside diameter: 6mm Fixing hole size: 4mm Fixing spacing: 23mm Weight: 12g

RWO R2067 screw-in black drain bung, suit fitting R2066 - Popular fit to many dinghies including Laser and ILCA Dimensions Aperture 17mm

RWO 2064 bayonet style white drain replacement bung for R2060 Dimensions Aperture 17mm Cut out 22mm

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and includes 2 x Laser XD Harken 16 mm Air...

Nautos Autobailer to suit all model Laser and ILCA sailing dinghies, comes as a complete swop-out assembly with fixing scrww

ILCA Laser Painter Line in yellow flecked, floating polyproplene line - 8mm x 8m Braid - Satisfies the requirement to carry a tow line in ILCA Class Events

RWO screw-in black drain bung and socket - Suits Laser and many other sailing dinghies Dimensions Aperture 17mm Cut out 22mm

Self-tapping grommets for Laser traveller fair leads. This items is placed under the deck to receive the screws from the traveler fairlead - It serves to hide the exposed screw but also add strength to the fitting

Heavy grade Eye Strap with 32mm Hole Centres  - Used for hiking strap, stern bulkhead attachment on Laser

Laser Cockpit Drain 92184 - This Laser Drain Bush Set sits at the rear of the cockpit and creates the opening for the self-bailer control rod to operate through. When replacing this item, be sure to bed it with Sikaflex 291    

Rooster toestraps use a unique rubber compound that has a very high coefficient of friction, whilst also being light and durable. Our new Pro Plus Range has this rubber added to the bottom of our padded toestrap.  Rooster Pro Plus Padded straps are...

Optiparts Drain Plug for Laser.

ILCA Laser Centreboard Stop Set by Holt How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap  Fit the part assembled unit to the centreboard and then align and...

The aluminium ball bearing Laser cam cleat is features hard anodized and PTFE coated ball bearing cams. Aluminium cams for Laser sailling wear significantly less than carbon composite (plastic) cams. Specifications Material: Aluminium Fixing screw: 5 mm...

The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similiar sealant to keep the hull watertight.

The Pico Toe Strap plate is used to spread the load when attaching toe strap or MK1/MK2 Laser friction pad. Specification Material: Plastic Colour: Blue

Laser Toe Strap Padded in grey with XD logo. Internal plastic stiffener stops the Laser Toe Strap from turning over, heat sealed screw holes for easy fit.