Sowester

Sowester Stainless Steel Rigging Screw, 20mm, is a heavy-duty closed-body turnbuckle for tensioning standing rigging, stays, guard wires and other wire runs on boats and coastal fittings. Made from...

Sowester Mooring Chain Sets with Large End Links are ready-cut galvanised chain lengths for swing moorings, risers, and anchor bridles. Each set is made from DIN 766 short-link chain and finished...

Sowester Stainless D Rings are solid, welded Dee rings for webbing, straps, and light rigging. Made in 314 stainless steel, they resist corrosion in damp and marine conditions and keep a clean,...

The Sowester Boat Hook with Stainless Head is a traditional fixed-length boat hook for picking up mooring lines, fending off, and working alongside when docking or leaving a berth. The head is...

Sowester Inglefield Clips are traditional brass sister clips, sold as an interlocking pair, for attaching flags and ensigns to flag halyards. They are used mainly on yacht and ship flag halyards, and...

Replacement boat hook head in marine-grade AISI 316 stainless steel. Polished finish, tapered socket, rounded ball tip, and a curved side hook for grabbing lines, rings, and fittings when docking or...

Marine-grade AISI 316 stainless steel swage less (mechanical) terminal designed to terminate 4mm stainless steel wire rope without a hydraulic swager or specialist press.Ideal for standing rigging,...

Made from durable, UV-resistant vinyl with a glossy white finish, the fender features a ribbed body for extra strength and even impact absorption. Both ends have molded eyelets that accept attachment...

Marine-grade 316 stainless steel stanchion base designed to mount a 25mm stanchion pole in a straight upright position. The triangular 3-hole base bolts to a flat deck, while the included hex bolt...

A clamp-on rail mount for fitting a marine antenna to a 25mm pushpit, pulpit or guardrail. The Sowester adjustable mount uses a ratchet lever so the antenna can be angled, locked, or laid down...

A durable, fully adjustable deck-mount base for marine VHF antennas. The 25mm (1") male thread is the industry-standard size used by most VHF, AIS and FM marine antennas, so it fits the majority of...

These Sowester stainless halyard shackles have a captive pin and line retaining bar. Ideal for halyards and other general riggig uses where it is preferred to have the shackles captive on the rope...

A compact, marine-grade snap hook with a cast teardrop body and spring-loaded gate for fast, one-handed attachment. Made from AISI 316 stainless steel for strong corrosion resistance in saltwater,...

Hot-dip galvanised folding rowlock for dinghies and small rowing boats. The U-shaped horn holds the oar when raised, then folds vertically down when not in use to keep the gunwale clear. The captive...

Sowester Stainless Rigging Screw with Fork / Swage less Terminals. AISI 316 stainless steel closed-body rigging screw with a fork (jaw) end on one side and a swage less terminal on the other for wire...

Marine-grade AISI 316 stainless steel swivel lead clip with a spring-loaded bolt snap and rotating eye. Built for saltwater use on leads, lanyards, fenders, keys, and general deck connections.The...

This versatile holder features a multi-position adjustable design that typically allows a full 0–180° range with multiple locking positions. Set your flagpole upright, angled, or nearly horizontal to...

Keep cabin and companionway doors securely open at sea with this compact Sowester wall-mounted door stopper 60mm with spring loaded latch. Made from AIS316 stainless steel with a polished finish - A...

The Sowester 3 Strand Nylon Rope is a strong, durable and flexible marine rope designed for applications where excellent shock absorption is required.Its traditional 3-strand construction is easy to...

Protect your boat, mooring lines, and deck fittings with the Sowester Mooring Snubber, designed for lines up to 19mm diameter. This high-quality rubber compensator absorbs sudden shock loads caused...

Protect your boat, mooring lines, and deck fittings with the Sowester Mooring Snubber, designed for lines up to 16mm diameter. This high-quality rubber compensator absorbs sudden shock loads caused...

Protect the corners of your boat, pontoon, dock, or inflatable with this durable black PVC corner fender. Designed specifically for high-impact areas, it provides reliable cushioning and prevents...

Protect your boat, cleats, and mooring lines from damaging shock loads with the Sowester Mooring Snubber Block. This tough, flexible rubber compensator absorbs the sudden surges caused by waves,...

Protect your boat from docks, pilings, and other vessels with this durable blue contour fender. Designed with a curved, half-round profile and reinforced mounting face, it sits snugly against your...

The Sowester PVC Straight Fender 38cm is designed for reliable docking and mooring protection, this sleek white fender cushions your vessel against docks, pilings, and other boats. It be mounted on...

The Sowester Screw-in Bung fits the Laser Standard and Topper Standard boats. It comes with a retaining piece and washer seal to stop any leaks. Features   Designed to fit existing Topper and Laser...

The Sowester Kayak Trolley is the perfect companion for hassle-free transport of your kayak to and from the water. Crafted from lightweight, durable aluminium, this trolley offers excellent strength...

The Sowester Waterproof Deck Hatch 375 x 270mm is a durable, high-quality marine access hatch designed for reliable watertight performance on boats, yachts, RVs, and other marine or outdoor...

Sowester Polyrope Coils (220m Coils) offer reliable, high-quality 3-strand twisted polypropylene rope. They are sold in 10 -12mm for potting and general use, also in 24 and 28mm for commercial...

The Sowester Rail Outboard Motor Bracket is a reliable, marine-grade solution for securely storing your auxiliary outboard engine on your boat's stern rail or pushpit when not in use. Designed for...

Sowester 316 stainless Snap shackles for use onboard and in various marine and industrial environments for quick connections and release under load Dimensions

Upgrade your fastening solutions with these premium Sowester Stainless Steel Wing Nuts – the perfect choice for quick, tool-free assembly and reliable performance in demanding environments...

Upgrade your fastening solutions with these premium Sowester Stainless Steel Wing Nuts – the perfect choice for quick, tool-free assembly and reliable performance in demanding environments...

Sowester Stainless Halyard Shackle with pin - Comes with captive main pin and retaining cross pin. Specifications Sizes: 5mm, 6mm, 8mm Material: Stainless Steel

Marine-grade stainless steel Dee shackles from Sowester, designed for boat rigging and general chandlery. The classic D-shaped body is well suited to in-line connections on lines, fittings and...

Sowester marine grade stainless steel bow style shackles for general marine and sailing use - Packs of 2 in sizes 4mm,5mm & 6mm and Single packs in sozes 8 & 10mm For higher load environments, we...

Sowester marine grade, 6mm stainless shackle is twisted to connect at a different angle than with a normal dee shackle. Features AIS316 stainless steel Twisted design Sold a pack of 2

Sowester long D-shackles are made from marine-grade AISI 316 stainless steel for reliable use in saltwater. The elongated body gives extra clearance for lines, webbing and fittings, while the screw...

Sowester U-Bolt in marine-grade stainless steel with U-shaped clamp, including nuts and deck plates. Dimensions Size

Premium Marine-Grade Lifting and Rigging EyeboltsCrafted from high-quality AISI 316 stainless steel, Sowester Eyebolts offer outstanding corrosion resistance, making them the ideal choice for marine,...