International Cruiser 200 Antifoul - 2.5L

International Cruiser 200 is a quality polishing antifouling that provides comprehensive protection for all substrates, including aluminium. Available in Bright White. Use antifouling paints safely. Always read the label and product information before use.

Features

• Protects any surface, including aluminium
• Bright White colour for a great appearance
• Easy application enables quick repairs

Specifications

• Brand: International
• Capacity: 2.5L
• Area: Below the Waterline
• Suitable for: Hull
• Finish/Sheen: Matt
• Type of Antifouling: Ablative
• Suitable Water Types: Sea Water, Fresh Water, Brackish Water
• Substrates: Aluminium / Zinc-Galvanised Steel, Cast Iron, GRP/FRP, Lead, Steel, Wood, Bronze/Stainless Steel
• Application Method: Brush, Roller
• Recommended Number of Coats: 2 - 3
• Typical Shelf Life: 2 Years

Colours Avaliablity

• White
• Blue
• Navy
• Black

Preparation 

PREVIOUSLY PAINTED SURFACE

• In Good Condition: All fouling and contamination must be thoroughly removed including the leached layer. Use high pressure fresh water wash (3000 psi/207 bar) and/or scraping and wet sanding with typically 80­120 grade paper. Do not dry sand. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.
• In Poor Condition: Use Interstrip to remove all traces of antifouling.

PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.

BARE GRP: Prime with Gel shield 200 for osmosis protection, or Primocon or Inter protect.

STEEL/IRON/LEAD/WOOD: Prime with Inter protect or Primocon.

PLYWOOD: Prime with Epic glass followed by Inter protect.

Hints

• Mixing: Thoroughly stir until product is mixed to a uniform consistency before use.
• Thinning:Thinning is not recommended. Antifouling performance can be compromised if correct dry film thickness is not applied
• Cleaner: YTA085 International Antifouling Thinner 3
• Ventilation and Humidity Control: Ensure adequate ventilation during use
• Other: Antifoulings should only be wet sanded. Never dry sand or burn­ - off old antifouling. True colour will develop after immersion

Hazard Warnings

Hazard Pictogram
Signal Word	Danger
Hazard Statements	Flammable liquid and vapour Causes serious eye damage May cause an allergic skin reaction Very toxic to aquatic life with long lasting effects
Precautionary Statement	General Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Prevention Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment. Response IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Take off contaminated clothing and wash it before reuse. IF IN EYES: Immediately call a POISON CENTER or physician. Storage Keep cool. Disposal Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazardous Ingredients	All White  Dicopper Oxide, Rosin, Fatty Acids, C18-unsatd, Trimers, Compds. with Oleylamine, Fatty Acids, Tall-oil, compds. with Oleylamine.
Supplemental Label Elements	Wear appropriate respirator when ventilation is inadequate

Download

Technical Data Sheet