Laser Rudders and Centreboards
-
Optiparts ILCA/ Laser Protection Pack
Optiparts
€10,074.44Complete package of Laser® and ILCA® protection for maststep, mast, tiller, outhaul and daggerboard. Contains 2 disks for the maststep, 2 stripes for the maststep and mast deck, 2 stripes for snug fit of the top mast section, 1 stripe for the...OPEX2001€10,074.44 -
ILCA Laser Centreboard ( Daggerboard) Stop Set by Holt
ILCA
€2,140.51ILCA Laser Centreboard Stop Set by Holt How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap Fit the part assembled unit to the centreboard and then align and...HT70201€2,140.51 -
Holt Monel Metal Rivets 1/4X1/2 (3 Pack)
Holt
€1,644.64Holt Marine Pre Packs - Monel Metal Pop Rivets Monel is is resistant to corrosion and acids so will not rust Ideal for fixing fittings on masts and booms A rivet gun will be required for fixing rivetsHA389€1,644.64 -
Holt Laser Rudder Retaining Pin with Cord 70141
Holt
€1,148.77ILCA or Laser tiller retaining pin to secure the tiller to the rudder head, supplied with securing cord Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmly pressed into the head before drilling the location hole...HT70141€1,148.77 -
Laser All Boats Rudder Clip Ring
Laser
€157.03A rudder ring is a must if you would like to keep your Rudder. It provides a secondary attachment of the rudder to the hull preventing detachment. Make sure you have a rudder ring fitted to save you money in the future.LS-85314€157.03 -
Optiparts Foil Protector Set for Laser - Clear
Optiparts
€1,644.64The Inexpensive, clear hard plastic profiles which fit over the traling edge of the Laser daggerboard and rudder. Protects your Laser foils from damage in storage or transportation. Specifications Material: Plastic Colour: ClearOPEX2059€1,644.64 -
ILCA / Laser Rudder Retaining Clip
ILCA
€818.19The ILCA Laser rudder retaining clip prevents the rudder popping up and becoming detached. The rudder clip is easy to fit but remember to use Sikaflex or similiar sealant to keep the hull watertight.ILC5954€818.19 -
ILCA Laser Daggerboard Stop Sets
ILCA
€1,644.64ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low How to assemble Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of...ILC3916€1,644.64 -
ILCA Laser Friction Pad - MK2
ILCA
€2,801.67The ILCA Laser Friction Pad MK2 is screwed to the back of your daggerboard casing and allows for perfect grip and slip ratio when raising the board.LS-91538€2,801.67 -
Laser Performance Friction Pad - MK1
Laser
€3,462.83The MK1 flat back rubber friction pad for the deck of any Laser dinghy designed as a friction plate to keep the Laser daggerboard in place during sailing.LS-85239€3,462.83 -
Holt Laser Rudder Gudgeon - Suits all Rigs
Holt
€983.48Laser Rudders Gudgeons by Holt - 2 Required per boat Fasteners 2 x Sowester Pan Head Self Tappers per Gudgeon - Size 8 x 1 1/2" Select size hereHT911201€983.48 -
ILCA Laser Rudder Gudgeon
ILCA
€1,148.77Genuine ILCA Rudder Gudgeon asteners 4 x Sowester Pan Head Self Tappers per Gudgeon - Size 8 x 1 1/2" Select size hereILC5950€1,148.77